How to Make a Wood Duck House

By Squarecat Designs

Instructions

Things You’ll Need:

Simple woodworking tools like a saw, hammer
Wood glue
Tape measure
Pencil
Board approximately board approximately 7 ft long,
1 inch thick and 10 inches wide
Portable drill with bits would also be helpful but not necessary

Step 1:
A nest box should be constructed of a weather-resistant wood such as cedar. The wood can be painted, stained or treated but only on the outside surface.
Step 2:
The box is a simple long rectangle as shown below.
Step 3:
The pole can be a galvanized steel fence post, a 2-inch metal pole or a 4 x 4-foot cedar post.
Step 4:
The entrance hole should be 4 inches in diameter or an oval that is 3 inches high and 4 inches wide. This is the perfect size for a wood duck.
Step 5:
A 3-inch wide strip of 1/4-inch mesh hardware cloth should be securely fastened to the inside of the box under the entrance hole. This will function as a ladder for the hen and newly hatched ducklings. Bend sharp edges under to protect the ducklings.
Step 6:
Pole mounted boxes should be placed in a shady location. When exposed to direct sun they may become too hot for egg survival. Also white paint and vent holes help but natural 1 inch think boards have proved to be the best choice.
Step 7:
Wood ducks are highly secretive and selective when choosing a nesting sight. Locate your box in a secluded area either near water or over water. If placed over water the entrance hole should face open water not the shoreline and it should be 4 foot above the high water line. If the box is placed on land it should be located no more than 30 to 150 feet from shoreline with no obstacles such as roads or fences in the way.

Tips & Warnings

A 3-inch layer of coarse sawdust should be placed at the bottom box to serve as nesting material and to keep the eggs from rolling around.
The more you know and learn about wood ducks in your area the better chance you have of providing them with a safe, cozy nest to raise their young.
It is very advisable to fit the pole with a sheet metal cone just below the box but at least three feet from the ground. This will safeguard the nest from mammalian predators such as raccoons, mink and squirrels. This cone guard technique also deters snakes. Sheet metal is hard to work with but these guards can easily be purchased if you chose.

Resources

Photo/Video Credit

http://www.woodducksociety.com/duckhouse.htm

More Puppy Pages

How to Make Wood Duck Nest Boxes

One of the few waterfowl to nest in trees, the wood duck is a striking bird with beautiful plumage that is a wonderful addition to the natural environment of a lake or pond. Wood duck nest boxes provide safe habitat and encourage the settlement of ducks...

Many species of ducks use holes in trees and other places to nest. Whether you want to keep ducks as pets or place your boxes in the wild to attract local ducks, a nesting box can be a fun project. There are many plans on how to build specific nesting...

Wood ducks are a priceless portion of the ecosystem, which explains why so many park systems go through the trouble of building convenient nesting sites in the form of wood duck boxes. Unfortunately, these ducks are often easy prey to predators. To that...

Birds build nests in order to provide a safe, warm and comfortable haven to reproduce and protect their eggs until they hatch into healthy young, and also to care for the young until they are old enough to explore the world on their own. The nest may...

How to Build a Nest Box for Garden Birds

Nest boxes are more than just aesthetically pleasing. They provide a home to garden birds. Provide food and water in the nest box and place it high enough to keep out pesky cats and children. Give a home to birds whose natural habitats are being...